Поставка гидравлики, деталей трубопровода, кованых фитингов, промышленного оборудования.
Вид: Ниппель равнопроходный стальной, Nipple;
Тип соединения: Резьбовой, Forget Steel Threaded Fittings;
Стандарт: ANSI B16.11;
Номинальный размер (NPS): 1"1/4;
Условная длина: 1"5/8;
Наружный диаметр: 1.660 inch, 42.2 мм;
Thread: ANSI B 1.20.1 – 1983
Buttwelding end: ASME B 16-25 - 2011
Таблица размеров резьбовых ниппелей
Номинальный размер | 1/8” | 1/4” | 3/8” | 1/2” | 3/4” | 1” | 1”1/4 | 1”1/2 | 2” | 2”1/2 | 3” | 4” | ||
O.D. | inc | 0,405 | 0,540 | 0,675 | 0,840 | 1,050 | 1,315 | 1,660 | 1,900 | 2,375 | 2,875 | 3,500 | 4,500 | |
mm | 10,3 | 13,7 | 17,1 | 21,3 | 26,7 | 33,4 | 42,2 | 48,3 | 60,3 | 73,0 | 88,9 | 114,3 | ||
Длина | 3/4” | 7/8” | 1” | 1”1/8 | 1”3/8 | 1”1/2 | 1”5/8 | 1”3/4 | 2” | 2”1/2 | 3” | 4” | ||
СТАНДАРТНАЯ ДЛИНА | 1”1-2 (38,1 mm) |
Sch. 40 |
ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | - |
Sch. 80 |
ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | - | ||
Sch. 160 |
ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | - | ||
Sch. XXS |
ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | - | ||
2” (50,8 mm) |
Sch. 40 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | |
Sch. 80 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | ||
Sch. 160 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | ||
Sch. XXS |
ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | ||
2”1-2 (63,5 mm) |
Sch. 40 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | |
Sch. 80 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | ||
Sch. 160 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | ||
Sch. XXS |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | ||
3” (76,2 mm) |
Sch. 40 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | - | |
Sch. 80 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | - | ||
Sch. 160 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | ||
Sch. XXS |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | - | ||
4” (101,6 mm) |
Sch. 40 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | |
Sch. 80 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ||
Sch. 160 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | ||
Sch. XXS |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ||
5” (127 mm) |
Sch. 40 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | |
Sch. 80 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ||
Sch. 160 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | ||
Sch. XXS |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ||
6” (152,4 mm) |
Sch. 40 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | |
Sch. 80 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ||
Sch. 160 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | ||
Sch. XXS |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ||
8” (203,2 mm) |
Sch. 40 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | |
Sch. 80 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ||
Sch. 160 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | ||
Sch. XXS |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ||
12” (304,8 mm) |
Sch. 40 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | |
Sch. 80 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ||
Sch. 160 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | ||
Sch. XXS |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok |
3000, 6000 | |
1-1/4 | |
Ниппель | |
Резьбовое ASME B16.11 | |
1-1/4 |
Вид: Ниппель равнопроходный стальной, Nipple;
Тип соединения: Резьбовой, Forget Steel Threaded Fittings;
Стандарт: ANSI B16.11;
Номинальный размер (NPS): 1"1/4;
Условная длина: 1"5/8;
Наружный диаметр: 1.660 inch, 42.2 мм;
Thread: ANSI B 1.20.1 – 1983
Buttwelding end: ASME B 16-25 - 2011
Таблица размеров резьбовых ниппелей
Номинальный размер | 1/8” | 1/4” | 3/8” | 1/2” | 3/4” | 1” | 1”1/4 | 1”1/2 | 2” | 2”1/2 | 3” | 4” | ||
O.D. | inc | 0,405 | 0,540 | 0,675 | 0,840 | 1,050 | 1,315 | 1,660 | 1,900 | 2,375 | 2,875 | 3,500 | 4,500 | |
mm | 10,3 | 13,7 | 17,1 | 21,3 | 26,7 | 33,4 | 42,2 | 48,3 | 60,3 | 73,0 | 88,9 | 114,3 | ||
Длина | 3/4” | 7/8” | 1” | 1”1/8 | 1”3/8 | 1”1/2 | 1”5/8 | 1”3/4 | 2” | 2”1/2 | 3” | 4” | ||
СТАНДАРТНАЯ ДЛИНА | 1”1-2 (38,1 mm) |
Sch. 40 |
ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | - |
Sch. 80 |
ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | - | ||
Sch. 160 |
ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | - | ||
Sch. XXS |
ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | - | ||
2” (50,8 mm) |
Sch. 40 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | |
Sch. 80 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | ||
Sch. 160 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | ||
Sch. XXS |
ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | ||
2”1-2 (63,5 mm) |
Sch. 40 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | |
Sch. 80 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | ||
Sch. 160 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | ||
Sch. XXS |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | ||
3” (76,2 mm) |
Sch. 40 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | - | |
Sch. 80 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | - | ||
Sch. 160 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | ||
Sch. XXS |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | - | ||
4” (101,6 mm) |
Sch. 40 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | |
Sch. 80 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ||
Sch. 160 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | ||
Sch. XXS |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ||
5” (127 mm) |
Sch. 40 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | |
Sch. 80 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ||
Sch. 160 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | ||
Sch. XXS |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ||
6” (152,4 mm) |
Sch. 40 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | |
Sch. 80 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ||
Sch. 160 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | ||
Sch. XXS |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ||
8” (203,2 mm) |
Sch. 40 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | |
Sch. 80 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ||
Sch. 160 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | ||
Sch. XXS |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ||
12” (304,8 mm) |
Sch. 40 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | |
Sch. 80 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ||
Sch. 160 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | ||
Sch. XXS |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok |
3000, 6000 | |
1-1/4 | |
Ниппель | |
Резьбовое ASME B16.11 | |
1-1/4 |
Вид: Ниппель равнопроходный стальной, Nipple;
Тип соединения: Резьбовой, Forget Steel Threaded Fittings;
Стандарт: ANSI B16.11;
Номинальный размер (NPS): 1"1/4;
Условная длина: 1"5/8;
Наружный диаметр: 1.660 inch, 42.2 мм;
Thread: ANSI B 1.20.1 – 1983
Buttwelding end: ASME B 16-25 - 2011
Таблица размеров резьбовых ниппелей
Номинальный размер | 1/8” | 1/4” | 3/8” | 1/2” | 3/4” | 1” | 1”1/4 | 1”1/2 | 2” | 2”1/2 | 3” | 4” | ||
O.D. | inc | 0,405 | 0,540 | 0,675 | 0,840 | 1,050 | 1,315 | 1,660 | 1,900 | 2,375 | 2,875 | 3,500 | 4,500 | |
mm | 10,3 | 13,7 | 17,1 | 21,3 | 26,7 | 33,4 | 42,2 | 48,3 | 60,3 | 73,0 | 88,9 | 114,3 | ||
Длина | 3/4” | 7/8” | 1” | 1”1/8 | 1”3/8 | 1”1/2 | 1”5/8 | 1”3/4 | 2” | 2”1/2 | 3” | 4” | ||
СТАНДАРТНАЯ ДЛИНА | 1”1-2 (38,1 mm) |
Sch. 40 |
ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | - |
Sch. 80 |
ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | - | ||
Sch. 160 |
ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | - | ||
Sch. XXS |
ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | - | ||
2” (50,8 mm) |
Sch. 40 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | |
Sch. 80 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | ||
Sch. 160 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | ||
Sch. XXS |
ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | ||
2”1-2 (63,5 mm) |
Sch. 40 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | |
Sch. 80 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | ||
Sch. 160 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | ||
Sch. XXS |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | ||
3” (76,2 mm) |
Sch. 40 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | - | |
Sch. 80 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | - | ||
Sch. 160 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | ||
Sch. XXS |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | - | ||
4” (101,6 mm) |
Sch. 40 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | |
Sch. 80 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ||
Sch. 160 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | ||
Sch. XXS |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ||
5” (127 mm) |
Sch. 40 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | |
Sch. 80 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ||
Sch. 160 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | ||
Sch. XXS |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ||
6” (152,4 mm) |
Sch. 40 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | |
Sch. 80 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ||
Sch. 160 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | ||
Sch. XXS |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ||
8” (203,2 mm) |
Sch. 40 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | |
Sch. 80 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ||
Sch. 160 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | ||
Sch. XXS |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ||
12” (304,8 mm) |
Sch. 40 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | |
Sch. 80 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ||
Sch. 160 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | ||
Sch. XXS |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok |
3000, 6000 | |
1-1/4 | |
Ниппель | |
Резьбовое ASME B16.11 | |
1-1/4 |
Вид: Ниппель равнопроходный стальной, Nipple;
Тип соединения: Резьбовой, Forget Steel Threaded Fittings;
Стандарт: ANSI B16.11;
Номинальный размер (NPS): 1"1/4;
Условная длина: 1"5/8;
Наружный диаметр: 1.660 inch, 42.2 мм;
Thread: ANSI B 1.20.1 – 1983
Buttwelding end: ASME B 16-25 - 2011
Таблица размеров резьбовых ниппелей
Номинальный размер | 1/8” | 1/4” | 3/8” | 1/2” | 3/4” | 1” | 1”1/4 | 1”1/2 | 2” | 2”1/2 | 3” | 4” | ||
O.D. | inc | 0,405 | 0,540 | 0,675 | 0,840 | 1,050 | 1,315 | 1,660 | 1,900 | 2,375 | 2,875 | 3,500 | 4,500 | |
mm | 10,3 | 13,7 | 17,1 | 21,3 | 26,7 | 33,4 | 42,2 | 48,3 | 60,3 | 73,0 | 88,9 | 114,3 | ||
Длина | 3/4” | 7/8” | 1” | 1”1/8 | 1”3/8 | 1”1/2 | 1”5/8 | 1”3/4 | 2” | 2”1/2 | 3” | 4” | ||
СТАНДАРТНАЯ ДЛИНА | 1”1-2 (38,1 mm) |
Sch. 40 |
ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | - |
Sch. 80 |
ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | - | ||
Sch. 160 |
ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | - | ||
Sch. XXS |
ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | - | ||
2” (50,8 mm) |
Sch. 40 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | |
Sch. 80 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | ||
Sch. 160 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | ||
Sch. XXS |
ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | ||
2”1-2 (63,5 mm) |
Sch. 40 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | |
Sch. 80 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | ||
Sch. 160 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | ||
Sch. XXS |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | ||
3” (76,2 mm) |
Sch. 40 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | - | |
Sch. 80 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | - | ||
Sch. 160 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | ||
Sch. XXS |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | - | ||
4” (101,6 mm) |
Sch. 40 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | |
Sch. 80 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ||
Sch. 160 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | ||
Sch. XXS |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ||
5” (127 mm) |
Sch. 40 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | |
Sch. 80 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ||
Sch. 160 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | ||
Sch. XXS |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ||
6” (152,4 mm) |
Sch. 40 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | |
Sch. 80 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ||
Sch. 160 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | ||
Sch. XXS |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ||
8” (203,2 mm) |
Sch. 40 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | |
Sch. 80 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ||
Sch. 160 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | ||
Sch. XXS |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ||
12” (304,8 mm) |
Sch. 40 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | |
Sch. 80 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ||
Sch. 160 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | ||
Sch. XXS |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok |
3000, 6000 | |
1-1/4 | |
Ниппель | |
Резьбовое ASME B16.11 | |
1-1/4 |
Длина 1 дюйм!!!
Код | Размер, Т | d | *H | L | L1 | Вес (kg) |
NIP300-600-FTF-1/8 | 1/8 | 4.1 | 12 | 10 | 6 | 0.03 |
NIP300-600-FTF-1/4 | 1/4 | 7.1 | 17 | 14 | 8 | 0.04 |
NIP300-600-FTF-3/8 | 3/8 | 8.9 | 19 | 14 | 8 | 0.05 |
NIP300-600-FTF-1/2 | 1/2 | 11.9 | 24 | 19 | 9 | 0.09 |
NIP300-600-FTF-3/4 | 3/4 | 16.0 | 30 | 19 | 10 | 0.15 |
NIP300-600-FTF-1 | 1 | 20.1 | 36 | 24 | 11 | 0.27 |
NIP300-600-FTF-1-1/4 | 1-1/4 | 27.9 | 46 | 24 | 12 | 0.45 |
NIP300-600-FTF-1-1/2 | 1-1/2 | 32.0 | 50 | 25 | 14 | 0.62 |
NIP300-600-FTF-2 | 2 | 39.9 | 65 | 26 | 16 | 1.03 |
NIP300-600-FTF-2-1/2 | 2-1/2 | 55.1 | 80 | 38 | 18 | 1.51 |
NIP300-600-FTF-3 | 3 | 65.0 | 95 | 40 | 20 | 2.22 |
3000, 6000 | |
1-1/4 | |
Ниппель | |
Резьбовое ASME B16.11 | |
1-1/4 |
Вид: Ниппель равнопроходный стальной, Nipple;
Тип соединения: Резьбовой, Forget Steel Threaded Fittings;
Стандарт: ANSI B16.11;
Номинальный размер (NPS): 1"1/4;
Условная длина: 1"5/8;
Наружный диаметр: 1.660 inch, 42.2 мм;
Thread: ANSI B 1.20.1 – 1983
Buttwelding end: ASME B 16-25 - 2011
Таблица размеров резьбовых ниппелей
Номинальный размер | 1/8” | 1/4” | 3/8” | 1/2” | 3/4” | 1” | 1”1/4 | 1”1/2 | 2” | 2”1/2 | 3” | 4” | ||
O.D. | inc | 0,405 | 0,540 | 0,675 | 0,840 | 1,050 | 1,315 | 1,660 | 1,900 | 2,375 | 2,875 | 3,500 | 4,500 | |
mm | 10,3 | 13,7 | 17,1 | 21,3 | 26,7 | 33,4 | 42,2 | 48,3 | 60,3 | 73,0 | 88,9 | 114,3 | ||
Длина | 3/4” | 7/8” | 1” | 1”1/8 | 1”3/8 | 1”1/2 | 1”5/8 | 1”3/4 | 2” | 2”1/2 | 3” | 4” | ||
СТАНДАРТНАЯ ДЛИНА | 1”1-2 (38,1 mm) |
Sch. 40 |
ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | - |
Sch. 80 |
ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | - | ||
Sch. 160 |
ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | - | ||
Sch. XXS |
ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | - | ||
2” (50,8 mm) |
Sch. 40 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | |
Sch. 80 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | ||
Sch. 160 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | ||
Sch. XXS |
ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | ||
2”1-2 (63,5 mm) |
Sch. 40 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | |
Sch. 80 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | ||
Sch. 160 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | ||
Sch. XXS |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | ||
3” (76,2 mm) |
Sch. 40 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | - | |
Sch. 80 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | - | ||
Sch. 160 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | ||
Sch. XXS |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | - | ||
4” (101,6 mm) |
Sch. 40 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | |
Sch. 80 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ||
Sch. 160 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | ||
Sch. XXS |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ||
5” (127 mm) |
Sch. 40 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | |
Sch. 80 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ||
Sch. 160 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | ||
Sch. XXS |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ||
6” (152,4 mm) |
Sch. 40 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | |
Sch. 80 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ||
Sch. 160 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | ||
Sch. XXS |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ||
8” (203,2 mm) |
Sch. 40 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | |
Sch. 80 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ||
Sch. 160 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | ||
Sch. XXS |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ||
12” (304,8 mm) |
Sch. 40 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | |
Sch. 80 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ||
Sch. 160 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | ||
Sch. XXS |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok |
3000, 6000 | |
1-1/4 | |
Ниппель | |
Резьбовое ASME B16.11 | |
1-1/4 |
Вид: Ниппель равнопроходный стальной, Nipple;
Тип соединения: Резьбовой, Forget Steel Threaded Fittings;
Стандарт: ANSI B16.11;
Номинальный размер (NPS): 1"1/4;
Условная длина: 1"5/8;
Наружный диаметр: 1.660 inch, 42.2 мм;
Thread: ANSI B 1.20.1 – 1983
Buttwelding end: ASME B 16-25 - 2011
Таблица размеров резьбовых ниппелей
Номинальный размер | 1/8” | 1/4” | 3/8” | 1/2” | 3/4” | 1” | 1”1/4 | 1”1/2 | 2” | 2”1/2 | 3” | 4” | ||
O.D. | inc | 0,405 | 0,540 | 0,675 | 0,840 | 1,050 | 1,315 | 1,660 | 1,900 | 2,375 | 2,875 | 3,500 | 4,500 | |
mm | 10,3 | 13,7 | 17,1 | 21,3 | 26,7 | 33,4 | 42,2 | 48,3 | 60,3 | 73,0 | 88,9 | 114,3 | ||
Длина | 3/4” | 7/8” | 1” | 1”1/8 | 1”3/8 | 1”1/2 | 1”5/8 | 1”3/4 | 2” | 2”1/2 | 3” | 4” | ||
СТАНДАРТНАЯ ДЛИНА | 1”1-2 (38,1 mm) |
Sch. 40 |
ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | - |
Sch. 80 |
ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | - | ||
Sch. 160 |
ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | - | ||
Sch. XXS |
ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | - | ||
2” (50,8 mm) |
Sch. 40 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | |
Sch. 80 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | ||
Sch. 160 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | ||
Sch. XXS |
ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | ||
2”1-2 (63,5 mm) |
Sch. 40 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | |
Sch. 80 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | ||
Sch. 160 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | ||
Sch. XXS |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | ||
3” (76,2 mm) |
Sch. 40 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | - | |
Sch. 80 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | - | ||
Sch. 160 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | ||
Sch. XXS |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | - | ||
4” (101,6 mm) |
Sch. 40 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | |
Sch. 80 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ||
Sch. 160 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | ||
Sch. XXS |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ||
5” (127 mm) |
Sch. 40 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | |
Sch. 80 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ||
Sch. 160 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | ||
Sch. XXS |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ||
6” (152,4 mm) |
Sch. 40 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | |
Sch. 80 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ||
Sch. 160 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | ||
Sch. XXS |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ||
8” (203,2 mm) |
Sch. 40 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | |
Sch. 80 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ||
Sch. 160 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | ||
Sch. XXS |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ||
12” (304,8 mm) |
Sch. 40 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | |
Sch. 80 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ||
Sch. 160 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | ||
Sch. XXS |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok |
3000, 6000 | |
1-1/4 | |
Ниппель | |
Резьбовое ASME B16.11 | |
1-1/4 |
Вид: Ниппель равнопроходный стальной, Nipple;
Тип соединения: Резьбовой, Forget Steel Threaded Fittings;
Стандарт: ANSI B16.11;
Номинальный размер (NPS): 1"1/4;
Условная длина: 1"5/8;
Наружный диаметр: 1.660 inch, 42.2 мм;
Thread: ANSI B 1.20.1 – 1983
Buttwelding end: ASME B 16-25 - 2011
Таблица размеров резьбовых ниппелей
Номинальный размер | 1/8” | 1/4” | 3/8” | 1/2” | 3/4” | 1” | 1”1/4 | 1”1/2 | 2” | 2”1/2 | 3” | 4” | ||
O.D. | inc | 0,405 | 0,540 | 0,675 | 0,840 | 1,050 | 1,315 | 1,660 | 1,900 | 2,375 | 2,875 | 3,500 | 4,500 | |
mm | 10,3 | 13,7 | 17,1 | 21,3 | 26,7 | 33,4 | 42,2 | 48,3 | 60,3 | 73,0 | 88,9 | 114,3 | ||
Длина | 3/4” | 7/8” | 1” | 1”1/8 | 1”3/8 | 1”1/2 | 1”5/8 | 1”3/4 | 2” | 2”1/2 | 3” | 4” | ||
СТАНДАРТНАЯ ДЛИНА | 1”1-2 (38,1 mm) |
Sch. 40 |
ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | - |
Sch. 80 |
ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | - | ||
Sch. 160 |
ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | - | ||
Sch. XXS |
ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | - | ||
2” (50,8 mm) |
Sch. 40 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | |
Sch. 80 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | ||
Sch. 160 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | ||
Sch. XXS |
ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | ||
2”1-2 (63,5 mm) |
Sch. 40 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | |
Sch. 80 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | ||
Sch. 160 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | ||
Sch. XXS |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | ||
3” (76,2 mm) |
Sch. 40 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | - | |
Sch. 80 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | - | ||
Sch. 160 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | ||
Sch. XXS |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | - | ||
4” (101,6 mm) |
Sch. 40 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | |
Sch. 80 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ||
Sch. 160 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | ||
Sch. XXS |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ||
5” (127 mm) |
Sch. 40 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | |
Sch. 80 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ||
Sch. 160 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | ||
Sch. XXS |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ||
6” (152,4 mm) |
Sch. 40 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | |
Sch. 80 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ||
Sch. 160 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | ||
Sch. XXS |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ||
8” (203,2 mm) |
Sch. 40 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | |
Sch. 80 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ||
Sch. 160 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | ||
Sch. XXS |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ||
12” (304,8 mm) |
Sch. 40 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | |
Sch. 80 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ||
Sch. 160 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | ||
Sch. XXS |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok |
3000, 6000 | |
1-1/4 | |
Ниппель | |
Резьбовое ASME B16.11 | |
1-1/4 |
Вид: Ниппель равнопроходный стальной, Nipple;
Тип соединения: Резьбовой, Forget Steel Threaded Fittings;
Стандарт: ANSI B16.11;
Номинальный размер (NPS): 1"1/4;
Условная длина: 1"5/8;
Наружный диаметр: 1.660 inch, 42.2 мм;
Thread: ANSI B 1.20.1 – 1983
Buttwelding end: ASME B 16-25 - 2011
Таблица размеров резьбовых ниппелей
Номинальный размер | 1/8” | 1/4” | 3/8” | 1/2” | 3/4” | 1” | 1”1/4 | 1”1/2 | 2” | 2”1/2 | 3” | 4” | ||
O.D. | inc | 0,405 | 0,540 | 0,675 | 0,840 | 1,050 | 1,315 | 1,660 | 1,900 | 2,375 | 2,875 | 3,500 | 4,500 | |
mm | 10,3 | 13,7 | 17,1 | 21,3 | 26,7 | 33,4 | 42,2 | 48,3 | 60,3 | 73,0 | 88,9 | 114,3 | ||
Длина | 3/4” | 7/8” | 1” | 1”1/8 | 1”3/8 | 1”1/2 | 1”5/8 | 1”3/4 | 2” | 2”1/2 | 3” | 4” | ||
СТАНДАРТНАЯ ДЛИНА | 1”1-2 (38,1 mm) |
Sch. 40 |
ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | - |
Sch. 80 |
ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | - | ||
Sch. 160 |
ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | - | ||
Sch. XXS |
ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | - | ||
2” (50,8 mm) |
Sch. 40 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | |
Sch. 80 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | ||
Sch. 160 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | ||
Sch. XXS |
ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | ||
2”1-2 (63,5 mm) |
Sch. 40 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | |
Sch. 80 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | ||
Sch. 160 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | ||
Sch. XXS |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | ||
3” (76,2 mm) |
Sch. 40 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | - | |
Sch. 80 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | - | ||
Sch. 160 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | ||
Sch. XXS |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | - | ||
4” (101,6 mm) |
Sch. 40 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | |
Sch. 80 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ||
Sch. 160 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | ||
Sch. XXS |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ||
5” (127 mm) |
Sch. 40 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | |
Sch. 80 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ||
Sch. 160 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | ||
Sch. XXS |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ||
6” (152,4 mm) |
Sch. 40 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | |
Sch. 80 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ||
Sch. 160 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | ||
Sch. XXS |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ||
8” (203,2 mm) |
Sch. 40 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | |
Sch. 80 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ||
Sch. 160 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | ||
Sch. XXS |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ||
12” (304,8 mm) |
Sch. 40 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | |
Sch. 80 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ||
Sch. 160 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | ||
Sch. XXS |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok |
3000, 6000 | |
1-1/4 | |
Ниппель | |
Резьбовое ASME B16.11 | |
1-1/4 |
Вид: Ниппель равнопроходный стальной, Nipple;
Тип соединения: Резьбовой, Forget Steel Threaded Fittings;
Стандарт: ANSI B16.11;
Номинальный размер (NPS): 1"1/4;
Условная длина: 1"5/8;
Наружный диаметр: 1.660 inch, 42.2 мм;
Thread: ANSI B 1.20.1 – 1983
Buttwelding end: ASME B 16-25 - 2011
Таблица размеров резьбовых ниппелей
Номинальный размер | 1/8” | 1/4” | 3/8” | 1/2” | 3/4” | 1” | 1”1/4 | 1”1/2 | 2” | 2”1/2 | 3” | 4” | ||
O.D. | inc | 0,405 | 0,540 | 0,675 | 0,840 | 1,050 | 1,315 | 1,660 | 1,900 | 2,375 | 2,875 | 3,500 | 4,500 | |
mm | 10,3 | 13,7 | 17,1 | 21,3 | 26,7 | 33,4 | 42,2 | 48,3 | 60,3 | 73,0 | 88,9 | 114,3 | ||
Длина | 3/4” | 7/8” | 1” | 1”1/8 | 1”3/8 | 1”1/2 | 1”5/8 | 1”3/4 | 2” | 2”1/2 | 3” | 4” | ||
СТАНДАРТНАЯ ДЛИНА | 1”1-2 (38,1 mm) |
Sch. 40 |
ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | - |
Sch. 80 |
ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | - | ||
Sch. 160 |
ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | - | ||
Sch. XXS |
ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | - | ||
2” (50,8 mm) |
Sch. 40 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | |
Sch. 80 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | ||
Sch. 160 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | ||
Sch. XXS |
ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | ||
2”1-2 (63,5 mm) |
Sch. 40 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | |
Sch. 80 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | ||
Sch. 160 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | ||
Sch. XXS |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | ||
3” (76,2 mm) |
Sch. 40 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | - | |
Sch. 80 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | - | ||
Sch. 160 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | ||
Sch. XXS |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | - | ||
4” (101,6 mm) |
Sch. 40 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | |
Sch. 80 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ||
Sch. 160 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | ||
Sch. XXS |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ||
5” (127 mm) |
Sch. 40 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | |
Sch. 80 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ||
Sch. 160 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | ||
Sch. XXS |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ||
6” (152,4 mm) |
Sch. 40 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | |
Sch. 80 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ||
Sch. 160 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | ||
Sch. XXS |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ||
8” (203,2 mm) |
Sch. 40 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | |
Sch. 80 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ||
Sch. 160 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | ||
Sch. XXS |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ||
12” (304,8 mm) |
Sch. 40 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | |
Sch. 80 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ||
Sch. 160 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | ||
Sch. XXS |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok |
3000, 6000 | |
1-1/4 | |
Ниппель | |
Резьбовое ASME B16.11 | |
1-1/4 |
Вид: Ниппель равнопроходный стальной, Nipple;
Тип соединения: Резьбовой, Forget Steel Threaded Fittings;
Стандарт: ANSI B16.11;
Номинальный размер (NPS): 1"1/4;
Условная длина: 1"5/8;
Наружный диаметр: 1.660 inch, 42.2 мм;
Thread: ANSI B 1.20.1 – 1983
Buttwelding end: ASME B 16-25 - 2011
Таблица размеров резьбовых ниппелей
Номинальный размер | 1/8” | 1/4” | 3/8” | 1/2” | 3/4” | 1” | 1”1/4 | 1”1/2 | 2” | 2”1/2 | 3” | 4” | ||
O.D. | inc | 0,405 | 0,540 | 0,675 | 0,840 | 1,050 | 1,315 | 1,660 | 1,900 | 2,375 | 2,875 | 3,500 | 4,500 | |
mm | 10,3 | 13,7 | 17,1 | 21,3 | 26,7 | 33,4 | 42,2 | 48,3 | 60,3 | 73,0 | 88,9 | 114,3 | ||
Длина | 3/4” | 7/8” | 1” | 1”1/8 | 1”3/8 | 1”1/2 | 1”5/8 | 1”3/4 | 2” | 2”1/2 | 3” | 4” | ||
СТАНДАРТНАЯ ДЛИНА | 1”1-2 (38,1 mm) |
Sch. 40 |
ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | - |
Sch. 80 |
ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | - | ||
Sch. 160 |
ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | - | ||
Sch. XXS |
ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | - | ||
2” (50,8 mm) |
Sch. 40 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | |
Sch. 80 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | ||
Sch. 160 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | ||
Sch. XXS |
ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | ||
2”1-2 (63,5 mm) |
Sch. 40 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | |
Sch. 80 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | ||
Sch. 160 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | ||
Sch. XXS |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | ||
3” (76,2 mm) |
Sch. 40 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | - | |
Sch. 80 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | - | ||
Sch. 160 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | ||
Sch. XXS |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | - | ||
4” (101,6 mm) |
Sch. 40 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | |
Sch. 80 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ||
Sch. 160 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | ||
Sch. XXS |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ||
5” (127 mm) |
Sch. 40 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | |
Sch. 80 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ||
Sch. 160 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | ||
Sch. XXS |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ||
6” (152,4 mm) |
Sch. 40 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | |
Sch. 80 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ||
Sch. 160 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | ||
Sch. XXS |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ||
8” (203,2 mm) |
Sch. 40 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | |
Sch. 80 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ||
Sch. 160 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | ||
Sch. XXS |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ||
12” (304,8 mm) |
Sch. 40 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | |
Sch. 80 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ||
Sch. 160 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | ||
Sch. XXS |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok |
3000, 6000 | |
1-1/4 | |
Ниппель | |
Резьбовое ASME B16.11 | |
1-1/4 |
Вид: Ниппель равнопроходный стальной, Nipple;
Тип соединения: Резьбовой, Forget Steel Threaded Fittings;
Стандарт: ANSI B16.11;
Номинальный размер (NPS): 1"1/4;
Условная длина: 1"5/8;
Наружный диаметр: 1.660 inch, 42.2 мм;
Thread: ANSI B 1.20.1 – 1983
Buttwelding end: ASME B 16-25 - 2011
Таблица размеров резьбовых ниппелей
Номинальный размер | 1/8” | 1/4” | 3/8” | 1/2” | 3/4” | 1” | 1”1/4 | 1”1/2 | 2” | 2”1/2 | 3” | 4” | ||
O.D. | inc | 0,405 | 0,540 | 0,675 | 0,840 | 1,050 | 1,315 | 1,660 | 1,900 | 2,375 | 2,875 | 3,500 | 4,500 | |
mm | 10,3 | 13,7 | 17,1 | 21,3 | 26,7 | 33,4 | 42,2 | 48,3 | 60,3 | 73,0 | 88,9 | 114,3 | ||
Длина | 3/4” | 7/8” | 1” | 1”1/8 | 1”3/8 | 1”1/2 | 1”5/8 | 1”3/4 | 2” | 2”1/2 | 3” | 4” | ||
СТАНДАРТНАЯ ДЛИНА | 1”1-2 (38,1 mm) |
Sch. 40 |
ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | - |
Sch. 80 |
ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | - | ||
Sch. 160 |
ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | - | ||
Sch. XXS |
ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | - | ||
2” (50,8 mm) |
Sch. 40 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | |
Sch. 80 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | ||
Sch. 160 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | ||
Sch. XXS |
ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | ||
2”1-2 (63,5 mm) |
Sch. 40 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | |
Sch. 80 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | ||
Sch. 160 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | ||
Sch. XXS |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | ||
3” (76,2 mm) |
Sch. 40 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | - | |
Sch. 80 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | - | ||
Sch. 160 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | ||
Sch. XXS |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | - | ||
4” (101,6 mm) |
Sch. 40 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | |
Sch. 80 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ||
Sch. 160 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | ||
Sch. XXS |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ||
5” (127 mm) |
Sch. 40 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | |
Sch. 80 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ||
Sch. 160 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | ||
Sch. XXS |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ||
6” (152,4 mm) |
Sch. 40 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | |
Sch. 80 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ||
Sch. 160 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | ||
Sch. XXS |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ||
8” (203,2 mm) |
Sch. 40 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | |
Sch. 80 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ||
Sch. 160 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | ||
Sch. XXS |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ||
12” (304,8 mm) |
Sch. 40 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | |
Sch. 80 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ||
Sch. 160 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | ||
Sch. XXS |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok |
3000, 6000 | |
1-1/4 | |
Ниппель | |
Резьбовое ASME B16.11 | |
1-1/4 |
Вид: Ниппель равнопроходный стальной, Nipple;
Тип соединения: Резьбовой, Forget Steel Threaded Fittings;
Стандарт: ANSI B16.11;
Номинальный размер (NPS): 1"1/4;
Условная длина: 1"5/8;
Наружный диаметр: 1.660 inch, 42.2 мм;
Thread: ANSI B 1.20.1 – 1983
Buttwelding end: ASME B 16-25 - 2011
Таблица размеров резьбовых ниппелей
Номинальный размер | 1/8” | 1/4” | 3/8” | 1/2” | 3/4” | 1” | 1”1/4 | 1”1/2 | 2” | 2”1/2 | 3” | 4” | ||
O.D. | inc | 0,405 | 0,540 | 0,675 | 0,840 | 1,050 | 1,315 | 1,660 | 1,900 | 2,375 | 2,875 | 3,500 | 4,500 | |
mm | 10,3 | 13,7 | 17,1 | 21,3 | 26,7 | 33,4 | 42,2 | 48,3 | 60,3 | 73,0 | 88,9 | 114,3 | ||
Длина | 3/4” | 7/8” | 1” | 1”1/8 | 1”3/8 | 1”1/2 | 1”5/8 | 1”3/4 | 2” | 2”1/2 | 3” | 4” | ||
СТАНДАРТНАЯ ДЛИНА | 1”1-2 (38,1 mm) |
Sch. 40 |
ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | - |
Sch. 80 |
ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | - | ||
Sch. 160 |
ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | - | ||
Sch. XXS |
ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | - | ||
2” (50,8 mm) |
Sch. 40 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | |
Sch. 80 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | ||
Sch. 160 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | ||
Sch. XXS |
ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | ||
2”1-2 (63,5 mm) |
Sch. 40 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | |
Sch. 80 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | ||
Sch. 160 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | ||
Sch. XXS |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | ||
3” (76,2 mm) |
Sch. 40 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | - | |
Sch. 80 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | - | ||
Sch. 160 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | ||
Sch. XXS |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | - | ||
4” (101,6 mm) |
Sch. 40 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | |
Sch. 80 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ||
Sch. 160 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | ||
Sch. XXS |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ||
5” (127 mm) |
Sch. 40 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | |
Sch. 80 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ||
Sch. 160 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | ||
Sch. XXS |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ||
6” (152,4 mm) |
Sch. 40 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | |
Sch. 80 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ||
Sch. 160 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | ||
Sch. XXS |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ||
8” (203,2 mm) |
Sch. 40 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | |
Sch. 80 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ||
Sch. 160 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | ||
Sch. XXS |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ||
12” (304,8 mm) |
Sch. 40 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | |
Sch. 80 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ||
Sch. 160 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | ||
Sch. XXS |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok |
3000, 6000 | |
1-1/4 | |
Ниппель | |
Резьбовое ASME B16.11 | |
1-1/4 |
Вид: Ниппель равнопроходный стальной, Nipple;
Тип соединения: Резьбовой, Forget Steel Threaded Fittings;
Стандарт: ANSI B16.11;
Номинальный размер (NPS): 1"1/4;
Условная длина: 1"5/8;
Наружный диаметр: 1.660 inch, 42.2 мм;
Thread: ANSI B 1.20.1 – 1983
Buttwelding end: ASME B 16-25 - 2011
Таблица размеров резьбовых ниппелей
Номинальный размер | 1/8” | 1/4” | 3/8” | 1/2” | 3/4” | 1” | 1”1/4 | 1”1/2 | 2” | 2”1/2 | 3” | 4” | ||
O.D. | inc | 0,405 | 0,540 | 0,675 | 0,840 | 1,050 | 1,315 | 1,660 | 1,900 | 2,375 | 2,875 | 3,500 | 4,500 | |
mm | 10,3 | 13,7 | 17,1 | 21,3 | 26,7 | 33,4 | 42,2 | 48,3 | 60,3 | 73,0 | 88,9 | 114,3 | ||
Длина | 3/4” | 7/8” | 1” | 1”1/8 | 1”3/8 | 1”1/2 | 1”5/8 | 1”3/4 | 2” | 2”1/2 | 3” | 4” | ||
СТАНДАРТНАЯ ДЛИНА | 1”1-2 (38,1 mm) |
Sch. 40 |
ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | - |
Sch. 80 |
ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | - | ||
Sch. 160 |
ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | - | ||
Sch. XXS |
ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | - | ||
2” (50,8 mm) |
Sch. 40 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | |
Sch. 80 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | ||
Sch. 160 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | ||
Sch. XXS |
ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | ||
2”1-2 (63,5 mm) |
Sch. 40 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | |
Sch. 80 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | ||
Sch. 160 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | ||
Sch. XXS |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | ||
3” (76,2 mm) |
Sch. 40 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | - | |
Sch. 80 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | - | ||
Sch. 160 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | ||
Sch. XXS |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | - | ||
4” (101,6 mm) |
Sch. 40 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | |
Sch. 80 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ||
Sch. 160 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | ||
Sch. XXS |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ||
5” (127 mm) |
Sch. 40 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | |
Sch. 80 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ||
Sch. 160 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | ||
Sch. XXS |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ||
6” (152,4 mm) |
Sch. 40 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | |
Sch. 80 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ||
Sch. 160 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | ||
Sch. XXS |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ||
8” (203,2 mm) |
Sch. 40 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | |
Sch. 80 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ||
Sch. 160 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | ||
Sch. XXS |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ||
12” (304,8 mm) |
Sch. 40 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | |
Sch. 80 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ||
Sch. 160 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | ||
Sch. XXS |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok |
3000, 6000 | |
1-1/4 | |
Ниппель | |
Резьбовое ASME B16.11 | |
1-1/4 |
Вид: Ниппель равнопроходный стальной, Nipple;
Тип соединения: Резьбовой, Forget Steel Threaded Fittings;
Стандарт: ANSI B16.11;
Номинальный размер (NPS): 1"1/4;
Условная длина: 1"5/8;
Наружный диаметр: 1.660 inch, 42.2 мм;
Thread: ANSI B 1.20.1 – 1983
Buttwelding end: ASME B 16-25 - 2011
Таблица размеров резьбовых ниппелей
Номинальный размер | 1/8” | 1/4” | 3/8” | 1/2” | 3/4” | 1” | 1”1/4 | 1”1/2 | 2” | 2”1/2 | 3” | 4” | ||
O.D. | inc | 0,405 | 0,540 | 0,675 | 0,840 | 1,050 | 1,315 | 1,660 | 1,900 | 2,375 | 2,875 | 3,500 | 4,500 | |
mm | 10,3 | 13,7 | 17,1 | 21,3 | 26,7 | 33,4 | 42,2 | 48,3 | 60,3 | 73,0 | 88,9 | 114,3 | ||
Длина | 3/4” | 7/8” | 1” | 1”1/8 | 1”3/8 | 1”1/2 | 1”5/8 | 1”3/4 | 2” | 2”1/2 | 3” | 4” | ||
СТАНДАРТНАЯ ДЛИНА | 1”1-2 (38,1 mm) |
Sch. 40 |
ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | - |
Sch. 80 |
ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | - | ||
Sch. 160 |
ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | - | ||
Sch. XXS |
ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | - | ||
2” (50,8 mm) |
Sch. 40 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | |
Sch. 80 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | ||
Sch. 160 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | ||
Sch. XXS |
ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | ||
2”1-2 (63,5 mm) |
Sch. 40 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | |
Sch. 80 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | ||
Sch. 160 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | ||
Sch. XXS |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | ||
3” (76,2 mm) |
Sch. 40 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | - | |
Sch. 80 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | - | ||
Sch. 160 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | ||
Sch. XXS |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | - | ||
4” (101,6 mm) |
Sch. 40 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | |
Sch. 80 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ||
Sch. 160 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | ||
Sch. XXS |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ||
5” (127 mm) |
Sch. 40 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | |
Sch. 80 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ||
Sch. 160 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | ||
Sch. XXS |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ||
6” (152,4 mm) |
Sch. 40 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | |
Sch. 80 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ||
Sch. 160 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | ||
Sch. XXS |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ||
8” (203,2 mm) |
Sch. 40 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | |
Sch. 80 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ||
Sch. 160 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | ||
Sch. XXS |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ||
12” (304,8 mm) |
Sch. 40 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | |
Sch. 80 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ||
Sch. 160 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | ||
Sch. XXS |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok |
3000, 6000 | |
1-1/4 | |
Ниппель | |
Резьбовое ASME B16.11 | |
1-1/4 |
Вид: Ниппель равнопроходный стальной, Nipple;
Тип соединения: Резьбовой, Forget Steel Threaded Fittings;
Стандарт: ANSI B16.11;
Номинальный размер (NPS): 1"1/4;
Условная длина: 1"5/8;
Наружный диаметр: 1.660 inch, 42.2 мм;
Thread: ANSI B 1.20.1 – 1983
Buttwelding end: ASME B 16-25 - 2011
Таблица размеров резьбовых ниппелей
Номинальный размер | 1/8” | 1/4” | 3/8” | 1/2” | 3/4” | 1” | 1”1/4 | 1”1/2 | 2” | 2”1/2 | 3” | 4” | ||
O.D. | inc | 0,405 | 0,540 | 0,675 | 0,840 | 1,050 | 1,315 | 1,660 | 1,900 | 2,375 | 2,875 | 3,500 | 4,500 | |
mm | 10,3 | 13,7 | 17,1 | 21,3 | 26,7 | 33,4 | 42,2 | 48,3 | 60,3 | 73,0 | 88,9 | 114,3 | ||
Длина | 3/4” | 7/8” | 1” | 1”1/8 | 1”3/8 | 1”1/2 | 1”5/8 | 1”3/4 | 2” | 2”1/2 | 3” | 4” | ||
СТАНДАРТНАЯ ДЛИНА | 1”1-2 (38,1 mm) |
Sch. 40 |
ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | - |
Sch. 80 |
ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | - | ||
Sch. 160 |
ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | - | ||
Sch. XXS |
ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | - | ||
2” (50,8 mm) |
Sch. 40 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | |
Sch. 80 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | ||
Sch. 160 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | ||
Sch. XXS |
ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | ||
2”1-2 (63,5 mm) |
Sch. 40 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | |
Sch. 80 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | ||
Sch. 160 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | ||
Sch. XXS |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | ||
3” (76,2 mm) |
Sch. 40 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | - | |
Sch. 80 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | - | ||
Sch. 160 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | ||
Sch. XXS |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | - | ||
4” (101,6 mm) |
Sch. 40 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | |
Sch. 80 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ||
Sch. 160 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | ||
Sch. XXS |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ||
5” (127 mm) |
Sch. 40 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | |
Sch. 80 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ||
Sch. 160 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | ||
Sch. XXS |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ||
6” (152,4 mm) |
Sch. 40 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | |
Sch. 80 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ||
Sch. 160 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | ||
Sch. XXS |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ||
8” (203,2 mm) |
Sch. 40 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | |
Sch. 80 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ||
Sch. 160 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | ||
Sch. XXS |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ||
12” (304,8 mm) |
Sch. 40 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | |
Sch. 80 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ||
Sch. 160 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | ||
Sch. XXS |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok |
3000, 6000 | |
1-1/4 | |
Ниппель | |
Резьбовое ASME B16.11 | |
1-1/4 |
Вид: Ниппель равнопроходный стальной, Nipple;
Тип соединения: Резьбовой, Forget Steel Threaded Fittings;
Стандарт: ANSI B16.11;
Номинальный размер (NPS): 1"1/4;
Условная длина: 1"5/8;
Наружный диаметр: 1.660 inch, 42.2 мм;
Thread: ANSI B 1.20.1 – 1983
Buttwelding end: ASME B 16-25 - 2011
Таблица размеров резьбовых ниппелей
Номинальный размер | 1/8” | 1/4” | 3/8” | 1/2” | 3/4” | 1” | 1”1/4 | 1”1/2 | 2” | 2”1/2 | 3” | 4” | ||
O.D. | inc | 0,405 | 0,540 | 0,675 | 0,840 | 1,050 | 1,315 | 1,660 | 1,900 | 2,375 | 2,875 | 3,500 | 4,500 | |
mm | 10,3 | 13,7 | 17,1 | 21,3 | 26,7 | 33,4 | 42,2 | 48,3 | 60,3 | 73,0 | 88,9 | 114,3 | ||
Длина | 3/4” | 7/8” | 1” | 1”1/8 | 1”3/8 | 1”1/2 | 1”5/8 | 1”3/4 | 2” | 2”1/2 | 3” | 4” | ||
СТАНДАРТНАЯ ДЛИНА | 1”1-2 (38,1 mm) |
Sch. 40 |
ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | - |
Sch. 80 |
ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | - | ||
Sch. 160 |
ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | - | ||
Sch. XXS |
ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | - | ||
2” (50,8 mm) |
Sch. 40 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | |
Sch. 80 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | ||
Sch. 160 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | ||
Sch. XXS |
ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | ||
2”1-2 (63,5 mm) |
Sch. 40 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | |
Sch. 80 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | ||
Sch. 160 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | ||
Sch. XXS |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | ||
3” (76,2 mm) |
Sch. 40 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | - | |
Sch. 80 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | - | ||
Sch. 160 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | ||
Sch. XXS |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | - | ||
4” (101,6 mm) |
Sch. 40 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | |
Sch. 80 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ||
Sch. 160 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | ||
Sch. XXS |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ||
5” (127 mm) |
Sch. 40 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | |
Sch. 80 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ||
Sch. 160 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | ||
Sch. XXS |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ||
6” (152,4 mm) |
Sch. 40 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | |
Sch. 80 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ||
Sch. 160 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | ||
Sch. XXS |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ||
8” (203,2 mm) |
Sch. 40 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | |
Sch. 80 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ||
Sch. 160 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | ||
Sch. XXS |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ||
12” (304,8 mm) |
Sch. 40 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | |
Sch. 80 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ||
Sch. 160 |
ok | ok | ok | ok | ok | ok | ok | ok | ok | - | - | - | ||
Sch. XXS |
ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | ok |
3000, 6000 | |
1-1/4 | |
Ниппель | |
Резьбовое ASME B16.11 | |
1-1/4 |